Continuous Type DC High Voltage Test Set Manufacturers Exporter to Egypt Africa

This equipment is used for testing the underground cable, large Generator, Motor Transformer capacitor etc as per IS specification. The unit comes equipped with digital meters, motorized controls, one/two way computer interface, Emergency shut down and Optimum operator safety features.

SPECIAL FEATURES

• Multiplier circuit for economy and better life.
• Multiple interlocks for human safety.
• Optional computer interface facility.
• Available unto 1000 kV and 1 Amps.

For further details or requirements, Email us or send Enquiry

Millivolt Drop Test Set Manufacturer Exporters to Mexico, America

Milli Volt Drop Test Set

For further details or requirements, Email us or send Enquiry

High Voltage Spark Testers Manufacturer Delhi India

High Voltage Spark Testers are designed for checking the quality of PVC coated wires during manufacturing at shop floor. The PVC wire is passed through brass ball chains which carry high voltage. If any pin hole comes in PVC, a spark develops and electro magnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit.

The equipment uses a high frequency oscillator circuit for rising frequency to search the fault at low leakage current and signifies that as a fault, he fault is displayed to the operator by means of a visual indicator and audible. The equipment can test a variety of cable at various voltages for which KV setting & sensitivity setting is provided.

The different Spark Testers manufactured are of:

• Power Frequency (50Hz)
• High Frequency (500 Hz/3000Hz-5000Hz)

The Power Frequency Spark Tester is a Conventional Spark tester, being used by wire and cable manufacturers, since the start of cable manufacturing. These spark testers hold the efficiency gradient of approximately 85%. They leave a burn mark on the cable/wire at the point of fault, which makes it easier to locate and isolate / mend the fault.

Suitable up to 200 Meter per minute
Easy to operate

The High Frequency Spark Tester is used for High speed precision jobs where the requirement is of seizing the maximum number of faults. These Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of a high Frequency Spark Tester is upto 95%-98%. This efficiency is much better than conventional spark tester.

SPECIAL FEATURES

• High Speed operation upto (1000 m/min).
• Much smaller and higher unit.
• Computer Interface facility available.
• Efficiency of operation upto 95%.
• Suitable for extruder and recoiling.
• Short Circuit Protected

For further details or requirements, Email us or send Enquiry

AC High Current Testing Equipment - L.T Parallel Inductor

Motorised moving coil and fixed reactor shall be provided for generating inductive current  for canceling capacitive current to reduce the input current to 20% (from 750 A to 150 A)

For further details or requirements, Email us or send Enquiry

Induced Over Voltage Test Set Manufacturer Exporter to Canada

Induced Over Voltage Test Set is used for testing the strength of insulation between turns and between other points of the transformers etc. as stipulated by BIS or other standard specification. For this test Double Voltage is applied across L.T. terminals for one minute, and to control the magnetizing current over voltage frequency is applied.

It is and independent unit having coupled motor and Generator with Control Panel to control the motor ad output voltage. Depending upon the design requirements  AC or DC motors are used.

SPECIAL FEATURES

• No foundation required
• Unit ready for use.
• Fine Voltage control.
• Short Circuit Protection.
• Caliberated Voltage and Ampere Meter.
• Easy to operate complete with operator safety features.
• Guaranteed for one year against manufacturing defects.
• Efficient After Sales Service.

For further details or requirements, Email us or send Enquiry