AC High Current Transformer Test Bench Manufacturers Exporters Delhi India

‘RE’ Electrical Test Bench for Testing Motors, transformers and  electrical Equipment etc. The Test Panel shall be suitable for 3 phase input supply having 63 Amp MCB for each phase independently.  Phase ON Indicator, Voltmeter with selector switch to indicate the voltage of each phase. Amperemeter with Multirange CT of 5/5, 5/15, 5/30 aand 5/60 A of class 0.5 accuracy for each phase, 3 Phase wattmeter of suitable range.

For further details or requirements, Email us or send Enquiry

High Voltage Spark Testers Exporters to Saudi Arabia, United Arab Emirates (UAE)

High Voltage Spark Testers are designed for checking the quality of PVC coated wires during manufacturing at shop floor. The PVC wire is passed through brass ball chains which carry high voltage. If any pin hole comes in PVC, a spark develops and electro magnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit.

The equipment uses a high frequency oscillator circuit for rising frequency to search the fault at low leakage current and signifies that as a fault, he fault is displayed to the operator by means of a visual indicator and audible. The equipment can test a variety of cable at various voltages for which KV setting & sensitivity setting is provided.

The different Spark Testers manufactured are of:

• Power Frequency (50Hz)
• High Frequency (500 Hz/3000Hz-5000Hz)

The Power Frequency Spark Tester is a Conventional Spark tester, being used by wire and cable manufacturers, since the start of cable manufacturing. These spark testers hold the efficiency gradient of approximately 85%. They leave a burn mark on the cable/wire at the point of fault, which makes it easier to locate and isolate / mend the fault. 

• Suitable up to 200 Meter per minute
• Easy to operate

The High Frequency Spark Tester is used for High speed precision jobs where the requirement is of seizing the maximum number of faults. These Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of a high Frequency Spark Tester is upto 95%-98%. This efficiency is much better than conventional spark tester.

SPECIAL FEATURES

• High Speed operation upto (1000 m/min).
• Much smaller and higher unit.
• Computer Interface facility available.
• Efficiency of operation upto 95%.
• Suitable for extruder and recoiling.
• Short Circuit Protected

For further details or requirements, Email us or send Enquiry

DC High Voltage Test Set (Stationary) Exporters to South Africa, Zimbabwe, Africa

This equipment is used for testing the underground cable, large Generator, Motor Transformer capacitor etc as per IS specification. The unit comes equipped with digital meters, motorized controls, one/two way computer interface, Emergency shut down and Optimum operator safety features.

SPECIAL FEATURES

• Multiplier circuit for economy and better life.
• Multiple interlocks for human safety.
• Optional computer interface facility.
• Available unto 1000 kV and 1 Amps.

For further details or requirements, Email us or send Enquiry

DC High Current Testers - Milli Volt Drop Test Set

Rectifiers & Electronics, Popularly known as 'RE', is the Pioneer Organization in the field of High voltage / High Current testing equipment such as Milli Volt Drop Test Set, AC/DC High Voltage Test Sets and Other Electrical High Voltage Test Equipment in INDIA. In the last 33 Years, Through Continuous Aspirations, 'RE' has earned the Goodwill of Quality Control Engineers and Research Scientists Through out the Country. 

For further details or requirements, Email us or send Enquiry

Servo Voltage Controlled Stabilizer Manufacturers Delhi India

Servo controlled Voltage Stabilizers (SCIVS) are specifically designed to manage input fluctuations of various trends. The output voltage can be controlled to within +/- 1.0%-+/-0.5% of the desired output. For this precise control a solid state circuit with a permanent magnet motor, is utilized and proficient gear system.

'RE' manufacturer Servo controlled Industrial Voltage Stabilizer upto2000kVA in three phase and up to 300kVA in single phase.

The Servo controlled Industrial Voltage Stabilizer over the rating of 1000kVA can be designed for use in 11,000 KV or 415 V i.e. HT or LT

SPECIAL FEATURES

• Available in HL/LT.
• New innovated design for HT.
• High Capacity available.
• Economic to buy & use.

For further details or requirements, Email us or send Enquiry