Rectifier Transformers Manufacturer Exporter to Thailand
These are manufactured for various purposes like electroplating, anodizing, chemical processes, and power supplies for Magnetic Charger, Battery Charger, Copper and silver refining and Drawing Large Generator Motor Transformer etc. Each of the above listed products are a field of their own. The rectifiers are designed for continuous use for which they can be air / and Oil Cooled. We have so far supplied 10,000 amps @ 80 volts maximum. The electronic controls can be provided which are used for various functions optional like, current density control, voltage control, temperature, speed control etc.
SPECIAL FEATURES
For further details or requirements, Email us or send Enquiry
SPECIAL FEATURES
- Highest rating available
- Various feature & functions upon request
- Electronic parameter monitoring.
For further details or requirements, Email us or send Enquiry
Induced Over Voltage/DFDV Test Set Manufacturers Exporters to Malaysia
Induced Over Voltage Test Set is used for testing the strength of insulation between turns and between other points of the transformers etc. as stipulated by BIS or other standard specification. For this test Double Voltage is applied across L.T. terminals for one minute, and to control the magnetizing current over voltage frequency is applied.
It is an independent unit having coupled motor and Generator with Control Panel to control the motor and output voltage. Depending upon the design requirements AC or DC motors are used.
SPECIAL FEATURES
For further details or requirements, Email us or send Enquiry
It is an independent unit having coupled motor and Generator with Control Panel to control the motor and output voltage. Depending upon the design requirements AC or DC motors are used.
SPECIAL FEATURES
- No foundation required
- Unit ready for use.
- Fine Voltage control.
- Short Circuit Protection.
- Caliberated Voltage and Ampere Meter.
- Easy to operate complete with operator safety features.
- Guaranteed for one year against manufacturing defects.
- Efficient After Sales Service.
For further details or requirements, Email us or send Enquiry
Stationary Type DC High Voltage Tester Manufacturer Exporter to Indonesia
This equipment is used for testing the underground cable, large Generator, Motor Transformer capacitor etc as per IS specification. The unit comes equipped with digital meters, motorized controls, one/two way computer interface, Emergency shut down and Optimum operator safety features.
SPECIAL FEATURES
For further details or requirements, Email us or send Enquiry
SPECIAL FEATURES
- Multiplier circuit for economy and better life.
- Multiple interlocks for human safety.
- Optional computer interface facility.
- Available unto 1000 kV and 1 Amps.
For further details or requirements, Email us or send Enquiry
Oil Dielectric Test Set Manufacturer Exporter to Singapore
A transformer Oil Breakdown Test Set is an equipment that measures the Di-electric Strength of the oil. The equipment consist of two High Voltage Coils having Starting winding at earth potential. The High Voltage Transformer is designed for testing Duty only. The equipment is made for testing transformer oil as per IS Specification. Regarding Transformer Oil and Electrode shape.
Manual Oil Test
This system utilizes Variac having knob to rise the voltage output manually. The equipment consist of Voltmeter provided in Primary Circuit to indicate output voltage even after the Breakdown and consist of Fast tripping circuit, Zero start end lock, cage door interlock and operation safety.
Motorised Oil Test Set Manual / Auto Stirring.
The system utilizes a motorized variac for rise of voltage at a pre-set rate of rise of voltage generated. A double throw switch is provided with circuit off Zero started. Locking pre-set tripping arrangement, cage door interlock and operation safety features.
Semi Automatic Oil Test Set
Same as above but rising and lowering of the voltage shall be Automatic with pre-set Weight time for stirring and supply.
Automatic Oil Test Set
This is a micro-processor based the programming is pre-set with the provision to change the programming weight time as per the used.
Sample Number, Operator Code, Memory etc. The results can be viewed on a backit.
For further details or requirements, Email us or send Enquiry
Manual Oil Test
- Motorized Oil Test set with Manual / Auto stirring
- Semi Automatic Oil Test Set.
- Manual Oil Test
Motorised Oil Test Set Manual / Auto Stirring.
The system utilizes a motorized variac for rise of voltage at a pre-set rate of rise of voltage generated. A double throw switch is provided with circuit off Zero started. Locking pre-set tripping arrangement, cage door interlock and operation safety features.
Semi Automatic Oil Test Set
Same as above but rising and lowering of the voltage shall be Automatic with pre-set Weight time for stirring and supply.
Automatic Oil Test Set
This is a micro-processor based the programming is pre-set with the provision to change the programming weight time as per the used.
Sample Number, Operator Code, Memory etc. The results can be viewed on a backit.
- Built in Safety Features
- Auto towards operation i.e.80 x 20 Column LCD Display.
- Real time clock & Date
- Printer Facility
- Computer Interface
- Seven Record Memory
For further details or requirements, Email us or send Enquiry
Micro-ohm Meter 10 Amps Manufacturer Exporter to Ethiopia
‘RE’ Micro-ohm Meter 10 amps capacity 3.5 digit suitable to checking low resistance of copper wires and other conductors from 1 micro-ohm to 19.99 ohm in 5 ranges. The unit is designed for working on 230 V AC + 10% and consumes 12 W Power. The resistance is displayed directly on seven segment LED display.
For further details or requirements, Email us or send Enquiry
For further details or requirements, Email us or send Enquiry
Transformer Test Bench Manufacturers Exporter to Algeria
‘RE’ Electrical Test Bench for Testing Motors, transformers and electrical Equipment etc. The Test Panel shall be suitable for 3 phase input supply having 63 Amp MCB for each phase independently. Phase ON Indicator, Voltmeter with selector switch to indicate the voltage of each phase. Amperemeter with Multirange CT of 5/5, 5/15, 5/30 aand 5/60 A of class 0.5 accuracy for each phase, 3 Phase wattmeter of suitable range.
For further details or requirements, Email us or send Enquiry
For further details or requirements, Email us or send Enquiry
Million Mega Ohm Meter Manufacturer Exporter to Libya
Million mega ohm Meters are designed for measurement of insulation resistance of insulating materials, Electrical & Electronic Components, Cables, Panels, Transformers, chokes, PCB's, Plugs & Sockets and many similar products. They are especially designed for testing cables & wires keeping in view high charging current of capacitive loads.
The unit consists of built in arrangement for charging the capacitor and indicates the value of insulation after preset time. This facility ensures efficient working of the unit.
SPECIAL FEATURES
For further details or requirements, Email us or send Enquiry
The unit consists of built in arrangement for charging the capacitor and indicates the value of insulation after preset time. This facility ensures efficient working of the unit.
SPECIAL FEATURES
- Solid State Circuit
- More reliable than hand cranked/motorized models
- Simple to operate
- Can be used on all types of insulation material
For further details or requirements, Email us or send Enquiry
Insulation Test Sets Manufacturer Exporter to Egypt
It shall be a compact high voltage A.C. insulation tester which may be powered by internal re-chargeable batteries and or by 230 V single phase AC supply. It shall display resistance at maximum leakage current 3mA. The unit shall be suitable for polarization Test.
For further details or requirements, Email us or send Enquiry
For further details or requirements, Email us or send Enquiry
DC High Voltage Test Equipment - Portable
Portable DC High Voltage Test Set is used for testing the underground cable for knowing the condition of cable-leakage at High Voltage. The units are supplied with 5 meter long input lead and 5 meter long output lead with sockets & clips. The unit comes with digital meters for easy readability with a test terminal for zero error.
SPECIAL FEATURES
For further details or requirements, Email us or send Enquiry
SPECIAL FEATURES
- Available in 30, 60, 75, 120, 150 & 220 kV models
- Easy to operate
- Digital meters for easy readability.
- High Voltage Surge protection
- Multiplier circuit for better life.
For further details or requirements, Email us or send Enquiry
AC High Voltage Test Sets
'RE' High Voltage Low Capacity Testers are specially designed for testing electrical, industrial appliances/Installations as per IS. Specifications. 'RE' High Voltage testers have been designed & developed in house. During manufacturing each unit is tested at multi stages, thus ensuring consistent & best quality.
These instruments are air-cooled, oil-cooled or air & oil cooled combined as per requirement. Beside common HV Test Kit, we manufacture PD free cascaded with indicator to reduce the input testing current
SPECIAL FEATURES
For further details or requirements, Email us or send Enquiry
These instruments are air-cooled, oil-cooled or air & oil cooled combined as per requirement. Beside common HV Test Kit, we manufacture PD free cascaded with indicator to reduce the input testing current
SPECIAL FEATURES
- Supplied unto 15 KV at 50mA
- Complete In-House Design
- Computer interface facility & test data monitoring
- HT Transformer in single housing for 15 minutes on/off duty.
- Guaranteed for a year of operation from the date of commissioning.
For further details or requirements, Email us or send Enquiry
Secondary Current Injection Test Set Manufacturer
'RE' Secondary Injection Test Sets have been designed keeping in view the requirements of field and laboratory. The sets are portable, light in weight, yet having all the technical features for testing relays and contractors.
SPECIAL FEATURES
- Compact Size.
- Built in safety arrangements in case of short circuit and over loading.
- Easy to operate.
- Efficient after sales service.
- Guaranteed for one year against manufacturing defects.
High Voltage Test Set Equipment Manufacturers Delhi
Rectifiers & Electronics, Popularly known as 'RE', is the Pioneer Organization in the field of High voltage testing equipment such as AC/DC High Voltage Test Sets and Other Electrical High Voltage Test Equipment in INDIA. In the last 33 Years, Through Continuous Aspirations, 'RE' has earned the Goodwill of Quality Control Engineers and Research Scientists Through out the Country.
'RE' manufactured products are Robust, Reliable, Simple to Operate, and User Friendly. At 'RE', there is Continuous Effort to give its customers an edge over their competition. We at 'RE' have complete in house Manufacturing Facility Inclusive of, "Fabrication of Housing, Construction of Transformer, Testing at every Stage, and Assembly of the Final Unit", which enables us to meet the Stringent Quality Norms.
Furnace High Current Transformers Manufacturer Exporter to Algeria
These are manufactured for various purposes like electroplating, anodizing, chemical processes, and power supplies for Magnetic Charger, Battery Charger, Copper and silver refining and Drawing Large Generator Motor Transformer etc. Each of the above listed products are a field of there own. The rectifiers are designed for continuous use for which they can be air / and Oil Cooled. We have so far supplied 10,000 amps @ 80 volts maximum. The electronic controls can be provided which are used for various functions optional like, current density control, voltage control, temperature, speed control etc.
SPECIAL FEATURES
- Highest rating available
- Various feature & functions upon request
- Electronic parameter monitoring.
Primary High Current Injection Test Set Nigeria, Niger
Primary Injection test sets are used to loading. Calibration and testing of CT's bimetals relays, Protection relays etc. Mostly Primary Injection Test set are designed as per customer's specification. The Primary Injections Test sets are of 15 minutes ON/30 Minutes OFF duty i.e. testing duty only. Loading transformers are design for continuous use for Temperature Rise for bus duct/Bus Bar etc.
Optional accessories requirement may include cable termination, timer, Temperature Indicator, multiple contactor, individual Phase control etc.
SPECIAL FEATURES
- Compact in nature
- It is available in portable trolley type/stationery type model Amps.
- Optional digital/analogue timer.
- Main Transformer upto 25,000 Amps Naturally air cooled type.
For further details or requirements, Email us or send Enquiry
Million Mega Ohm Meter Manufacturers Exporters to South Africa
Million mega ohm Meters are designed for measurement of insulation resistance of insulating materials, Electrical & Electronic Components, Cables, Panels, Transformers, chokes, PCB's, Plugs & Sockets and many similar products. They are especially designed for testing cables & wires keeping in view high charging current of capacitive loads. The unit consists of built in arrangement for charging the capacitor and indicates the value of insulation after preset time. This facility ensures efficient working of the unit.
SPECIAL FEATURES
- Solid State Circuit
- More reliable than hand cranked/motorized models
- Simple to operate
- Can be used on all types of insulation material
For further details or requirements, Email us or send Enquiry
Insulation Test Sets Manufacturer Exporter to Zimbabwe, Africa
Insulation Test Sets (Rubber / Acrylic / Fiber etc)
It shall be a compact high voltage A.C. insulation tester which may be powered by internal re-chargeable batteries and or by 230 V single phase AC supply. It shall display resistance at maximum leakage current 3mA. The unit shall be suitable for polarization Test.
For further details or requirements, Email us or send Enquiry
Continuous Type DC High Voltage Test Set Manufacturers Exporter to Egypt Africa
This equipment is used for testing the underground cable, large Generator, Motor Transformer capacitor etc as per IS specification. The unit comes equipped with digital meters, motorized controls, one/two way computer interface, Emergency shut down and Optimum operator safety features.
SPECIAL FEATURES
- Multiplier circuit for economy and better life.
- Multiple interlocks for human safety.
- Optional computer interface facility.
- Available unto 1000 kV and 1 Amps.
High Voltage Spark Testers Manufacturer Delhi India
High Voltage Spark Testers are designed for checking the quality of PVC coated wires during manufacturing at shop floor. The PVC wire is passed through brass ball chains which carry high voltage. If any pin hole comes in PVC, a spark develops and electro magnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit.
The equipment uses a high frequency oscillator circuit for rising frequency to search the fault at low leakage current and signifies that as a fault, he fault is displayed to the operator by means of a visual indicator and audible. The equipment can test a variety of cable at various voltages for which KV setting & sensitivity setting is provided.
The different Spark Testers manufactured are of:
The Power Frequency Spark Tester is a Conventional Spark tester, being used by wire and cable manufacturers, since the start of cable manufacturing. These spark testers hold the efficiency gradient of approximately 85%. They leave a burn mark on the cable/wire at the point of fault, which makes it easier to locate and isolate / mend the fault.
Suitable up to 200 Meter per minute
Easy to operate
The High Frequency Spark Tester is used for High speed precision jobs where the requirement is of seizing the maximum number of faults. These Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of a high Frequency Spark Tester is upto 95%-98%. This efficiency is much better than conventional spark tester.
SPECIAL FEATURES
For further details or requirements, Email us or send Enquiry
The equipment uses a high frequency oscillator circuit for rising frequency to search the fault at low leakage current and signifies that as a fault, he fault is displayed to the operator by means of a visual indicator and audible. The equipment can test a variety of cable at various voltages for which KV setting & sensitivity setting is provided.
The different Spark Testers manufactured are of:
- Power Frequency (50Hz)
- High Frequency (500 Hz/3000Hz-5000Hz)
The Power Frequency Spark Tester is a Conventional Spark tester, being used by wire and cable manufacturers, since the start of cable manufacturing. These spark testers hold the efficiency gradient of approximately 85%. They leave a burn mark on the cable/wire at the point of fault, which makes it easier to locate and isolate / mend the fault.
Suitable up to 200 Meter per minute
Easy to operate
The High Frequency Spark Tester is used for High speed precision jobs where the requirement is of seizing the maximum number of faults. These Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of a high Frequency Spark Tester is upto 95%-98%. This efficiency is much better than conventional spark tester.
SPECIAL FEATURES
- High Speed operation upto (1000 m/min).
- Much smaller and higher unit.
- Computer Interface facility available.
- Efficiency of operation upto 95%.
- Suitable for extruder and recoiling.
- Short Circuit Protected
For further details or requirements, Email us or send Enquiry
Subscribe to:
Posts (Atom)
