DC High Current Rectifier Transformer Exporters to Costa Rica, Panama
These are manufactured for various purposes like electroplating, anodizing, chemical processes, and power supplies for Magnetic Charger, Battery Charger, Copper and silver refining and Drawing Large Generator Motor Transformer etc. Each of the above listed products are a field of there own. The rectifiers are designed for continuous use for which they can be air / and Oil Cooled. We have so far supplied 10,000 amps @ 80 volts maximum. The electronic controls can be provided which are used for various functions optional like, current density control, voltage control, temperature, speed control etc.
SPECIAL FEATURES
- Highest rating available
- Various feature & functions upon request
- Electronic parameter monitoring.
High Voltage Spark Testers Manufacturer Suppliers to Cuba, Dominican Republic
High Voltage Spark Testers are designed for checking the quality of PVC coated wires during manufacturing at shop floor. The PVC wire is passed through brass ball chains which carry high voltage. If any pin hole comes in PVC, a spark develops and electro magnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit.
The equipment uses a high frequency oscillator circuit for rising frequency to search the fault at low leakage current and signifies that as a fault, he fault is displayed to the operator by means of a visual indicator and audible. The equipment can test a variety of cable at various voltages for which KV setting & sensitivity setting is provided.
The different Spark Testers manufactured are of
Power Frequency (50Hz)
High Frequency (500 Hz/3000Hz-5000Hz)
The Power Frequency Spark Tester is a Conventional Spark tester, being used by wire and cable manufacturers, since the start of cable manufacturing. These spark testers hold the efficiency gradient of approximately 85%. They leave a burn mark on the cable/wire at the point of fault, which makes it easier to locate and isolate / mend the fault.
Suitable up to 200 Meter per minute
Easy to operate
The High Frequency Spark Tester is used for High speed precision jobs where the requirement is of seizing the maximum number of faults. These Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of a high Frequency Spark Tester is upto 95%-98%. This efficiency is much better than conventional spark tester.
SPECIAL FEATURES
- High Speed operation upto (1000 m/min).
- Much smaller and higher unit.
- Computer Interface facility available.
- Efficiency of operation upto 95%.
- Suitable for extruder and recoiling.
- Short Circuit Protected
Induced Over Voltage Test Set Manufacturers India
Induced Over Voltage Test Set is used for testing the strength of insulation between turns and between other points of the transformers etc. as stipulated by BIS or other standard specification. For this test Double Voltage is applied across L.T. terminals for one minute, and to control the magnetizing current over voltage frequency is applied.
It is and independent unit having coupled motor and Generator with Control Panel to control the motor ad output voltage. Depending upon the design requirements AC or DC motors are used.
SPECIAL FEATURES
- No foundation required
- Unit ready for use.
- Fine Voltage control.
- Short Circuit Protection.
- Caliberated Voltage and Ampere Meter.
- Easy to operate complete with operator safety features.
- Guaranteed for one year against manufacturing defects.
- Efficient After Sales Service.
For further details or requirements, Email us or send Enquiry
Subscribe to:
Posts (Atom)
