High Voltage Spark Testers Exporters to Saudi Arabia

RE High voltage spark testers are designed for checking the quality of insulation coated wires for pin holes / weak insulation / exposed conductor during manufacturing at work floor.  The wire is passed through brass ball beads which carry high voltage. If any pin hole is detected in PVC, a spark develops and electro magnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit. Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of Spark Tester is up to 95%.

Features:

• Designed for extruder and recoiling operations.
• Height adjustable Electrode box
• Compact size.
• Built in safety features for operators
• Easy to operate.
• Recoiling shutdown as per operator setting.

For further details or requirements, email us at info@re-india.com

Motorized Oil Test Set Manufacturer Exporters to South Africa

Motorized Oil Test Set is suitable for testing dielectric strength of insulating oils e.g. transformer oil etc confirming to IS:335 for carrying out test as laid down in IS:6792. The unit consists of High Voltage Transformer with epoxy encapsulated secondary coils. The High Voltage Transformer feeds H.T. through electrodes to the oil under test in a removable oil test Cup with adjustable gap as per IS specifications. The H.T. is varied sleeplessly by varying the primary voltage through a variac. All protective and safety devices viz MCB, pushbuttons, indicators, switch, contractor and electrical interlock etc. are in built in the unit.

For further details or requirements, email us at info@re-india.com

HV Rubber Testing Set Manufacturer Exporter to Brazil

‘RE’ AC HV Rubber testing set is used for Testing Rubber Mats. These sets are generally used in Electrical manufacturing Industry/Power Houses, Electrical Repair etc. where AC H.V. test set is suggest by BIS or IEC. During AC H.V. testing High current is generated due to capacitive loading. AC High voltage test equipments are designed for continuous use, for testing, and can withstand short circuit. Fault burning can also be provided if desired.

For further details or requirements, email us at info@re-india.com

Tracking Resistance Erosion Test Equipment Manufacturer Exporters to Canada

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.

The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.

The results obtained by checking tracking index are not used directly for evaluation of safe creepage distances while designing any electrical apparatus.

With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.

The number of drops at which break down occurs across the surface is the function of voltage

The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)

The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking.

For further details or requirements, email us at info@re-india.com

Sphere Gaps Manufacturer Exporters to Dubai UAE

RE, Sphere Gap is provided with Motorised arrangement to adjust the gap. The lower sphere gap shall Motorised and shall move upwards and downwards for the adjustment of gap. The upper sphere shall be hang shall be roof of the test lab with in insulator and current limiting resistance shall be provided.

Features:

• Available upto 500mm sphere supplied upto 300mm sphere.
• Digital distance measurement.

For further details or requirements, email us at info@re-india.com

Kilo Volt Meters / Voltage Dividers Manufacturer Exporter India

Kilo Volt Meter (kV) meters  used to measure the kilo volt value of an Instrument Transformer, CT/PT etc. The unit is used for higher value calibration with a wide range from 1% to 110%. Kilo Voltmeters are highly accurate, portable voltage measurement systems traceable to NABL standards. The Kilo meter series consists of a high voltage divider assembly, a precision readout device and interconnection leads. The battery operation makes the system completely portable for field testing while the precision divider assembly and readout device makes it suitable for laboratory use.

Features:

• Used to measure AC/DC voltage measurement / partial Discharge measurement from any High Voltage source such as AC HV test system, PT/CT power / distribution transformer.
• Available up to 800Kv.
• Variable Capacitance from 50pf to 1nf.
• Perform multiple measurements.
• DC measurement, AC peak, AC-RMS,True Value.
• Digital Read out.
•  AC/DC Coupling.
• Battery or line power, Built in Self regulating battery charger.
• Light weight & portable divider.

For further details or requirements, email us at info@re-india.com

Cable Fault Burning Unit for HV/LV cables

Converts high resistance faults to short circuit faults. Available for HV/LV cables. For manufactures use only. Helps save the damaged part.

Features:
Helps utilize the TDR.
LV Fault Burner upto 30kVA.
HV Fault Burner Upto 70kVA.

For further details or requirements, email us at info@re-india.com

Impulse Generator - AC High Voltage Testing Equipment

‘RE’ Impulse Generators operates under a control system, which charges the impulse generator by the  charging unit. Charging time and charging voltage can be selected. Once the selected charging voltage has been reached, a trigger pulse initiates the firing of the lowest spark-gap of the impulse generator. When all the spark-gaps fired all the stages are connected in series thus multiplying the charging voltage. The impulse voltage divider reduces he impulse voltage to a value that the measuring and recording instruments require.

Features:

• Charging Rectifier
• Impulse generator to generate lightning impulses
• Control and measuring system.
• Divider.
• Shunt
• Chopping Gap / Multiple Chopping Gap.
• Resistor set to generate switching impulses 250/2500.
• Overshoot Compensation.
• Measuring system.
• Set to Generate impulse currents

For further details or requirements, email us at info@re-india.com