Insulation Test Sets (Rubber / Acrylic / Fiber etc.) Exporter in India

‘RE’ AC HV Rubber testing set is used for Testing Rubber Mats. These sets are generally used in Electrical manufacturing Industry/Power Houses, Electrical Repair etc. where AC H.V. test set is suggest by BIS or IEC. During AC H.V. testing High current is generated due to capacitive loading. AC High voltage test equipments are designed for continuous use, for testing, and can withstand short circuit. Fault burning can also be provided if desired.

Why Us?

• Complete In-house manufacturing facility
• Quality products that are economically priced
• Un-comparable after sales service
• Complete In-house R&D facility 
• Recognition by all the Test Houses in the country

For further details or requirements, email us at info@re-india.com

HT Parallel Inductor Exporter in India

HT Parallel Inductor is used for range extension of Megger/Tettex/Presco AG Tan-Delta and Capacitance Test Set. It enables the inbuilt power supply to be able to test high capacity generators by regenerating the test current in parallel resonant design.The unit is so skillfully designed and constructed where we are able to achieve a Q-factor of 30 plus. The unit is housed in MS angle housing and manually controlled from the top.

Why Us?

• Complete In-house manufacturing facility
• Quality products that are economically priced
• Un-comparable after sales service
• Complete In-house R&D facility 
• Recognition by all the Test Houses in the country

For further details or requirements, email us at info@re-india.com

Motorized Oil Test Set Exporter in India

Motorized Oil Test Set is suitable for testing dielectric strength of insulating oils e.g. transformer oil etc confirming to IS:335 for carrying out test as laid down in IS:6792. The unit consists of High Voltage Transformer with epoxy encapsulated secondary coils. The High Voltage Transformer feeds H.T. through electrodes to the oil under test in a removable oil test Cup with adjustable gap as per IS specifications. The H.T. is varied sleeplessly by varying the primary voltage through a variac. All protective and safety devices viz MCB, pushbuttons, indicators, switch, contractor and electrical interlock etc. are in built in the unit.

Why us?

• Complete In-house manufacturing facility
• Quality products that are economically priced
• Un-comparable after sales service
• Complete In-house R&D facility 
• Recognition by all the Test Houses in the country

For further details or requirements, email us at info@re-india.com

High Voltage Spark Tester Exporter in India

RE High voltage spark testers are designed for checking the quality of insulation coated wires for pin holes / weak insulation / exposed conductor during manufacturing at work floor.  The wire is passed through brass ball beads which carry high voltage. If any pin hole is detected in PVC, a spark develops and electromagnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit. Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of Spark Tester is up to 95%.

Why us?

• Complete In-house manufacturing facility
• Quality products that are economically priced
• Un-comparable after sales service
• Complete In-house R&D facility 
• Recognition by all the Test Houses in the country

For further details or requirements, Email us at info@re-india.com

AC High Voltage Breakdown Test Sets Manufacturer in Delhi, India

AC high Voltage breakdown testers are designed for testing LT equipment and Home appliances as per IS/IEC standards. Even the smallest units are complete with all required accessories and features that are provided on the most advance high capacity unit. The unit is designed keeping safety as an utmost priority. It is suitable for application in Laboratories, manufacturing units and sites.

Features

• Light in weight.
• Portable for any application.
• Additional safety features for users.
• Complete high voltage test facility instead of just breakdown facility.

Standard Accessories

• I/p Lead – 3 meter
• O/p Lead – 3 meter

Optional Accessories

• HT Cable if need extra more than 3meter.
• Earthing lead.
• Crocodile clamp
• Dead man switch
• Grounding rod
• Hand Held HV Probe set

For further details or requirements, Email us

AC High Voltage Cascaded Test Sets Manufacturers in Delhi, India

AC High Voltage High capacity testers are  specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International  Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

Features

• Light in weight
• Casted Wheel for easy movement
• Multiple safety locks for the operator
• Specially designed for field operation.

Standard Accessories

• Interconnecting Control Cable.
• Discharge Rod.
• Audio Visual alarm indicator.
• Corona Shield

Optional Accessories

• Output HV cable.
• Interconnecting / input power cable.
• Earthling lead.
• Canvas cover.
• LV Transformer Oil.

For further details or requirements, Email us

AC High Voltage Low Capacity Test Sets Manufacturers in Delhi, India

AC High Voltage Low capacity testers are  specially designed for testing Insulators, CT’s PT’s, Low dielectric capacitive electrical equipment, transformers etc. as per National and International  Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 200kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

Features

• Light in weight
• Casted Wheel for easy movement
• Multiple safety locks for the operator
• Specially designed for field operation.

Standard Accessories

• Interconnecting Control Cable.
• Discharge Rod.
• Audio Visual alarm indicator.
• Corona Shield

Optional Accessories

• Output HV cable.
• Interconnecting / input power cable.
• Earthling lead.
• Canvas cover.
• LV Transformer Oil.

For further details or requirements, Email us

AC High Voltage High Capacity Test Set Manufacturer in Delhi, India

AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards. During manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

Features

• Light in weight
• Casted Wheel for easy movement
• Multiple safety locks for the operator
• Specially designed for field operation.

Standard Accessories

• Interconnecting Control Cable.
• Discharge Rod.
• Audio Visual alarm indicator.
• Corona Shield

Optional Accessories

• Output HV cable.
• Interconnecting / input power cable.
• Earthling lead.
• Canvas cover.
• LV Transformer Oil.

For further details or requirements, Email us

High Voltage HT Parallel Inductor Exporter to United Kingdom

HT Parallel Inductor is used for range extension of Megger/Tettex/Presco AG Tan-Delta and Capacitance Test Set. It enables the inbuilt power supply to be able to test high capacity generators by regenerating the test current in parallel resonant design.The unit is so skillfully designed and constructed where we are able to achieve a Q-factor of 30 plus. The unit is housed in MS angle housing and manually controlled from the top.

Features

• Q factor of more than 30.
• Compatible with any Tan Delta unit.
• Portable and Rugged in construction.

Rectifiers & Electronics, Popularly known as 'RE', is the Pioneer Organization in the field of High voltage testing equipment such as AC/DC High Voltage Test Sets and Other Electrical High Voltage Test Equipment in INDIA. In the last 33 Years, Through Continuous Aspirations, 'RE' has earned the Goodwill of Quality Control Engineers and Research Scientists Throughout the Country.

'RE' has been a Leading Exporter of High Voltage Testing Equipment to Countries like United Kingdom, Zambia, Kenya, Germany, Dubai, Bangladesh, Bhutan, Nepal, etc.

For further details or requirements, Email us

High Voltage Insulation Test Sets Exporters to Germany

‘RE’ AC HV Rubber testing set is used for Testing Rubber Mats. These sets are generally used in Electrical manufacturing Industry/Power Houses, Electrical Repair etc. where AC H.V. test set is suggest by BIS or IEC. During AC H.V. testing High current is generated due to capacitive loading. AC High voltage test equipments are designed for continuous use, for testing, and can withstand short circuit. Fault burning can also be provided if desired.

Rectifiers & Electronics, Popularly known as 'RE', is the Pioneer Organization in the field of High voltage testing equipment such as AC/DC High Voltage Test Sets and Other Electrical High Voltage Test Equipment in INDIA. In the last 33 Years, Through Continuous Aspirations, 'RE' has earned the Goodwill of Quality Control Engineers and Research Scientists Throughout the Country.

'RE' has been a Leading Exporter of High Voltage Testing Equipment to Countries like United Kingdom, Zambia, Kenya, Germany, Dubai, Bangladesh, Bhutan, Nepal, etc.

For further details or requirements, Email us

AC High Voltage Breakdown Test Set Exporter to Kenya

AC High Voltage Breakdown Test Set (0-15KV,up to100mA)

Application – LT equipment and component manufacturer

AC high Voltage breakdown testers are designed for testing LT equipment and Home appliances as per IS/IEC standards. Even the smallest units are complete with all required accessories and features that are provided on the most advance high capacity unit. The unit is designed keeping safety as an utmost priority. It is suitable for application in Laboratories, manufacturing units and sites.

Features

• Light in weight.
• Portable for any application.
• Additional safety features for users.
• Complete high voltage test facility instead of just breakdown facility.

Rectifiers & Electronics, Popularly known as 'RE', is the Pioneer Organization in the field of High voltage testing equipment such as AC/DC High Voltage Test Sets and Other Electrical High Voltage Test Equipment in INDIA. In the last 33 Years, Through Continuous Aspirations, 'RE' has earned the Goodwill of Quality Control Engineers and Research Scientists Throughout the Country.

'RE' has been a Leading Exporter of High Voltage Testing Equipment to Countries like United Kingdom, Zambia, Kenya, Germany, Dubai, Bangladesh, Bhutan, Nepal, etc.

For further details or requirements, Email us

High Voltage Low Capacity Testers Exporter to Dubai

AC High Voltage Low Capacity Testers are  specially designed for testing Insulators, CT’s PT’s ,  Low dielectric capacitive electrical equipment, transformers etc. as per National and International  Standards.  During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 200kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

Features

• Light in weight
• Casted Wheel for easy movement
• Multiple safety locks for the operator
• Specially designed for field operation.

Rectifiers & Electronics, Popularly known as 'RE', is the Pioneer Organization in the field of High voltage testing equipment such as AC/DC High Voltage Test Sets and Other Electrical High Voltage Test Equipment in INDIA. In the last 33 Years, Through Continuous Aspirations, 'RE' has earned the Goodwill of Quality Control Engineers and Research Scientists Through out the Country.

'RE' has been a Leading Exporter of High Voltage Testing Equipment to Countries like United Kingdom, Zambia, Kenya, Germany, Dubai, Bangladesh, Bhutan, Nepal, etc.

For further details or requirements, Email us

Semi Automatic Oil Test Set Manufacturers Delhi, India

Semi Automatic Oil Test set is designed for testing the dielectric strength of insulating oil as per IS-335. The unit develops high voltage between electrodes immersed in oil under test as per IS:6792. In addition to the test preparation in detail, the set is automatically governed by a trouble-free Microprocessor. These features enable user to operate the equipment with a single touch of the 'Feather Touch Button'. The results can be viewed on the backlit LCD display until reset or Power off.

Features

• Compact size & portable design
• Build in safety arrangements
• Easy to operate
• Auto / Manual Selectable
• One Touch Operation
• On Screen LCD
• Real Time Clock & Date
• Rate of rise of voltage 0.2kV/sec

Rectifiers & Electronics, popularly known as 'RE', is the pioneer organization in the field of High Voltage Testing Equipment such as AC/DC High Voltage Test Sets and Other Electrical High Voltage Test Equipment in INDIA. In the last 33 Years, through continuous aspirations, 'RE' has earned the goodwill of Quality Control Engineers and Research Scientists through out the country.


For further details or requirements, Email us

High Voltage Spark Testers Manufacturer Delhi, India

RE High voltage spark testers are designed for checking the quality of insulation coated wires for pin holes / weak insulation / exposed conductor during manufacturing at work floor. The wire is passed through brass ball beads which carry high voltage. If any pin hole is detected in PVC, a spark develops and electromagnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit. Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of Spark Tester is up to 95%.

Special Features

• Designed for extruder and recoiling operations.
• Height adjustable Electrode box
• Compact size.
• Built in safety features for operators
• Easy to operate.
• Recoiling shutdown as per operator setting.

For further details or requirements, Email us

AC High Voltage High Capacity Cascaded Testers Manufacturer Delhi, India

AC High Voltage High Capacity Cascaded Testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International  Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

Features

• Light in weight
• Casted Wheel for easy movement
• Multiple safety locks for the operator
• Specially designed for field operation.

For further details or requirements, Email us

AC High Voltage High Capacity Testers Manufacturer Delhi, India

AC High Voltage High Capacity Testers are specially designed for generators, transformers, testing cables and other high capacitive equipments as per National and International Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution test.

Standard Accessories

• Interconnecting Control Cable.
• Discharge Rod.
• Audio Visual alarm indicator.
• Corona Shield

Optional Accessories

• Output HV cable.
• Interconnecting / input power cable.
• Earthling lead.
• Canvas cover.
• LV Transformer Oil.

For further details or requirements, Email us

AC High Voltage Low Capacity Test Sets for Testing Insulators

AC High Voltage Low capacity testers are  specially designed for testing Insulators, CT’s PT’s, Low dielectric capacitive electrical equipment, transformers etc. as per National and International  Standards.  During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 200kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

AC High Voltage Low Capacity Test Set
Sr. No.	Parameters	Description
1	I/p Voltage	220/230V or 380/400V, 50 or 60HZ AC supply
2	O/p Voltage	Up 800KV and 250mA
3	Capacity	Up  to 200KVA
4	Timer	0-9999 Sec./min. Digital
5	Control	Type 1- The unit can be manual/motorized control for voltage variation and push button controlled for HT actuation. Type  2- The unit can be complete with on board digitized panel with or without computer connectivity. Type  3- The unit can be PLC based complete with computer, HMI memory, printer etc. for operation.
6	Metering	Voltmeter : One Digital type connected on HT side to indicate the output voltage Scale :  0-800 kV AC. Ammeter : One Digital type ammeter Connected on earth side to indicate the leakage Current on sample under test. Scale :  0-500mA Applicable only for type -1 For type -2 and type 3 metering is self contained
7	Protection	Tripping   -  A fast acting DC relay will isolate the circuit when the current exceeds pre-set level. Overload  - This is used as a  secondary protection  in case the input loads exceeds the preset value Overvoltage -  This is used as a  secondary protection  in case the output voltage exceeds the preset value
8	Interlocking	Zero Start Interlock  -  The unit will have zero start interlocking to avoid the transients on HV transformer and provision for  cage door interlocking shall also be provided. Earth interlock- It ensures that HV will not actutae untill good earthing is not provided.
9	Termination	The HT output on suitable HT insulator and other point at earth potential will be brought out on suitable insulator
10	Control Panel	The control panel is designed for five unique purposes. 1 -Control 2- Measure 3- Protect (Active and Passive) 4- Tripping 5 -Annunciate
11	HV Transformer	The transformers are designed and manufactured as per IS /IEC guidelines. Single /  Multiple stage stepup transformers are utilized  for achiving the desired voltage. The units are designed and manufactured using the  preeminent material from India and Abroad. The coils are vacuum impregnated and insulated with High Quality EHV Grade transformer oil as per relevant IS and IEC Standard.

For further details or requirements, Email us

AC High Voltage HV Testers for Testing Transformers

AC High Voltage High capacity testers are  specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International  Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

Features:

• Light in weight
• Casted Wheel for easy movement
• Multiple safety locks for the operator
• Specially designed for field operation.

Standard Accessories:

• Interconnecting Control Cable.
• Discharge Rod.
• Audio Visual alarm indicator.
• Corona Shield

Optional Accessories:

• Output HV cable.
• Interconnecting / input power cable.
• Earthling lead.
• Canvas cover.
• LV Transformer Oil.

For further details or requirements, Email us

High Voltage High Capacity Testers for Testing Generators

AC High Voltage High capacity testers are  specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International  Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

For further details or requirements, Email us

AC HV Rubber Testing Set for Testing Rubber Mats

‘RE’ AC HV Rubber testing set is used for Testing Rubber Mats. These sets are generally used in Electrical manufacturing Industry/Power Houses, Electrical Repair etc. where AC H.V. test set is suggest by BIS or IEC. During AC H.V. testing High current is generated due to capacitive loading. AC High voltage test equipments are designed for continuous use, for testing, and can withstand short circuit. Fault burning can also be provided if desired.

AC High Voltage Insulation Test Set
Sr. No.	Parameters	Description
1	I/p Voltage	220/230V or 380/400V, 50/60HZ AC supply
2	O/p Voltage	Up 60KV and 100mA
3	Capacity	Up  to 6KVA
4	Timer	0-9999 Sec./min. Digital
5	Control	1- The unit can be manual/motorized control for voltage variation and push button controlled for HT actuation. 2-Selectror switch to select leakage current at 25%,50%,75% and 100% of the mA capacity required. 3- The unit can be microprocessor based complete with on board memory, printout facility, programmable features etc. 4- The unit can be PLC based complte with computer, HMI memory, printer etc. for operation.
6	Metering	Voltmeter : One Digital type connected on HT side to indicate the output voltage Scale :  0-60 kV AC. Ammeter : One Digital type ammeter Connected on earth side to indicate the leakage Current on sample under test. Scale :  0-100mA
7	Protection	A fast acting DC relay will isolate the circuit when the current exceeds pre-set level.
8	Interlocking	The unit will have zero start interlocking to avoid the transients on HV transformer and provision for  cage door interlocking shall also be provided
9	Construction	AC High voltage test set consists of 1) Control panel cum Regulating Transformer cum High Voltage Transformer.
9(a)	Control Panel	Consist of : LT ON Indicator , Push button to actuate HT, HT ON Indicator,Push button to deactuate HT, Fault Indicator (HT OFF Indicator), Push Button Switch to increase / decrease the output voltage, Tripping selector switch with tripping @ 10-15-20-25-30-35-40-50-60-70-80-90-100mA, Timer ON/OFF Switch, Switch for rate of rise @ 0.5kV/sec and 2kV/sec,  Timer Digital, Digital KV Meter, Digital mA Meter
9(b)	Regulating Transformer	Continuously variable transformer which feeds 0-230 V, to the main HV transformer. The voltage is boosted in ratio with transformer design. No wave shape distortion will take place. One terminal of HT transformer is maintained at earth potential through CST terminal, the other Ht terminal is brought out on suitable H.T. Load. Protection:  The protective circuit incorporated in this unit consist of the following : A) Zero Start Interlocking B) Over current relay with current selection C) Cage door at top side This prevents accidental start of unit after break down.
9(c)	HV Transformer	The Main step up transformer is housed inside the body  supported with welded angle iron frame and the output has been brought out through  H.T.  Terminal.

For further details or requirements, Email us

HT Parallel Inductor to Test High Capacity Generators

HT Parallel Inductor is used for range extension of Megger/Tettex/Presco AG Tan-Delta and Capacitance Test Set. It enables the inbuilt power supply to be able to test high capacity generators by regenerating the test current in parallel resonant design.The unit is so skillfully designed and constructed where we are able to achieve a Q-factor of 30 plus. The unit is housed in MS angle housing and manually controlled from the top.

For further details or requirements, Email us

High Voltage Spark Testers for checking weak insulation / exposed conductor

RE High voltage spark testers are designed for checking the quality of insulation coated wires for pin holes / weak insulation / exposed conductor during manufacturing at work floor.  The wire is passed through brass ball beads which carry high voltage. If any pin hole is detected in PVC, a spark develops and electromagnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit. Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of Spark Tester is up to 95%.

For further details or requirements, Email us

Fully Automatic Oil Test Set for Testing Dielectric Strength of Insulating Oil

Fully Automatic Oil Test set is designed for testing the dielectric strength of insulating oil as per IS-335.The unit develops high voltage between electrodes immersed in oil under test as per IS:6792. In addition to the test preparation in detail, the set is automatically governed by a trouble-free Microprocessor. These features enable user to operate the equipment with a single touch of the 'Feather Touch Button'. The results can be viewed on the backlit LCD display or can be printed as a hard copy. The results can be summarized at a later stage because of the presence of memory function for the tests conducted stored in the memory.

For further details or requirements, Email us

AC High Voltage High Capacity Testers for Testing Cables, Generators, Transformers

AC High Voltage High capacity testers are  specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International  Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

For further details or requirements, Email us

High Voltage Cascaded Test Sets for Testing Cables, Generators, Transformers

AC High Voltage High capacity testers are  specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International  Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

Features

• Light in weight
• Casted Wheel for easy movement
• Multiple safety locks for the operator
• Specially designed for field operation.

For further details or requirements, Email us

High Voltage High Capacity Test Set Manufacturers Exporters Abu Dhabi

AC High Voltage High capacity testers are  specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International  Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

Features

• Light in weight
• Casted Wheel for easy movement
• Multiple safety locks for the operator
• Specially designed for field operation

For further details or requirements, Email us

Fully Automatic Oil Test Set Manufacturers Exporters to Doha Qatar

Automatic Oil Test set is designed for testing the dielectric strength of insulating oil as per IS-335.The unit develops high voltage between electrodes immersed in oil under test as per IS:6792. In addition to the test preparation in detail, the set is automatically governed by a trouble-free Microprocessor. These features enable user to operate the equipment with a single touch of the 'Feather Touch Button'. The results can be viewed on the backlit LCD display or can be printed as a hard copy. The results can be summarized at a later stage because of the presence of memory function for the tests conducted stored in the memory.

Features

• Compact size & portable design
• Build in safety arrangements
• Easy to operate
• Auto / Manual Selectable
• One Touch Operation
• On Screen LCD & Printer Facility on the Unit
• Real Time Clock & Date
• 9999 record Memory
• Computer Connectivity through USB/RS232
• Operator code programmable
• Rate of rise of voltage 0.5kV/sec to 5.0 kV/sec

For further details or requirements, Email us

AC High Voltage Low Capacity Testers Manufacturers Exporters to Kuwait

AC High Voltage Low capacity testers are  specially designed for testing Insulators , CT’s PT’s ,  Low dielectric capacitive electrical equipment, transformers etc. as per National and International  Standards.  During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 200kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

AC High Voltage Low Capacity Test Set
Sr. No.	Parameters	Description
1	I/p Voltage	220/230V or 380/400V, 50 or 60HZ AC supply
2	O/p Voltage	Up 800KV and 250mA
3	Capacity	Up  to 200KVA
4	Timer	0-9999 Sec./min. Digital
5	Control	Type 1- The unit can be manual/motorized control for voltage variation and push button controlled for HT actuation. Type  2- The unit can be complete with on board digitized panel with or without computer connectivity. Type  3- The unit can be PLC based complete with computer, HMI memory, printer etc. for operation.
6	Metering	Voltmeter : One Digital type connected on HT side to indicate the output voltage Scale :  0-800 kV AC. Ammeter : One Digital type ammeter Connected on earth side to indicate the leakage Current on sample under test. Scale :  0-500mA Applicable only for type -1 For type -2 and type 3 metering is self contained
7	Protection	Tripping   -  A fast acting DC relay will isolate the circuit when the current exceeds pre-set level. Overload  - This is used as a  secondary protection  in case the input loads exceeds the preset value Overvoltage -  This is used as a  secondary protection  in case the output voltage exceeds the preset value
8	Interlocking	Zero Start Interlock  -  The unit will have zero start interlocking to avoid the transients on HV transformer and provision for  cage door interlocking shall also be provided. Earth interlock- It ensures that HV will not actutae untill good earthing is not provided.
9	Termination	The HT output on suitable HT insulator and other point at earth potential will be brought out on suitable insulator
10	Control Panel	The control panel is designed for five unique purposes. 1 -Control 2- Measure 3- Protect (Active and Passive) 4- Tripping 5 -Annunciate
11	HV Transformer	The transformers are designed and manufactured as per IS /IEC guidelines. Single /  Multiple stage step up transformers are utilized  for achieving the desired voltage. The units are designed and manufactured using the  preeminent material from India and Abroad. The coils are vacuum impregnated and insulated with High Quality EHV Grade transformer oil as per relevant IS and IEC Standard.

For further details or requirements, Email us

Insulation Test Sets Manufacturers Exporters Bahrain

‘RE’ AC HV Rubber testing set is used for Testing Rubber Mats. These sets are generally used in Electrical manufacturing Industry/Power Houses, Electrical Repair etc. where AC H.V. test set is suggest by BIS or IEC. During AC H.V. testing High current is generated due to capacitive loading. AC High voltage test equipments are designed for continuous use, for testing, and can withstand short circuit. Fault burning can also be provided if desired.

For further details or requirements, Email us

High Voltage Tester - H T Parallel Inductor Saudi Arabia

HT Parallel Inductor is used for range extension of Megger/Tettex/Presco AG Tan-Delta and Capacitance Test Set. It enables the inbuilt power supply to be able to test high capacity generators by regenerating the test current in parallel resonant design.The unit is so skillfully designed and constructed where we are able to achieve a Q-factor of 30 plus. The unit is housed in MS angle housing and manually controlled from the top.

For further details or requirements, Email us

High Voltage Spark Testers Doha Qatar

RE High voltage spark testers are designed for checking the quality of insulation coated wires for pin holes / weak insulation / exposed conductor during manufacturing at work floor.  The wire is passed through brass ball beads which carry high voltage. If any pin hole is detected in PVC, a spark develops and electromagnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit. Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of Spark Tester is up to 95%.

For further details or requirements, Email us

AC High Voltage Test Sets - Breakdown Type Dubai, UAE

AC High Voltage Breakdown Test Set (0-15KV,up to100mA)

Application – LT equipment and component manufacturer

AC high Voltage breakdown testers are designed for testing LT equipment and Home appliances as per IS/IEC standards. Even the smallest units are complete with all required accessories and features that are provided on the most advance high capacity unit. The unit is designed keeping safety as an utmost priority. It is suitable for application in Laboratories, manufacturing units and sites.

Features

• Light in weight.
• Portable for any application.
• Additional safety features for users.
• Complete high voltage test facility instead of just breakdown facility.

For further details or requirements, Email us

High Voltage Spark Testers Kuwait

RE High voltage spark testers are designed for checking the quality of insulation coated wires for pin holes / weak insulation / exposed conductor during manufacturing at work floor.  The wire is passed through brass ball beads which carry high voltage. If any pin hole is detected in PVC, a spark develops and electromagnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit. Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of Spark Tester is up to 95%.

For further details or requirements, Email us

AC High Voltage Cascaded Test Set Doha, Qatar

AC High Voltage High capacity testers are  specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International  Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

For further details or requirements, Email us

High Voltage Motorized Oil Test Set Abu Dhabi, UAE

Motorized Oil Test Set is suitable for testing dielectric strength of insulating oils e.g. transformer oil etc confirming to IS:335 for carrying out test as laid down in IS:6792. The unit consists of High Voltage Transformer with epoxy encapsulated secondary coils. The High Voltage Transformer feeds H.T. through electrodes to the oil under test in a removable oil test Cup with adjustable gap as per IS specifications. The H.T. is varied sleeplessly by varying the primary voltage through a variac. All protective and safety devices viz MCB, pushbuttons, indicators, switch, contractor and electrical interlock etc. are in built in the unit.

For further details or requirements, Email us

AC High Voltage Low Capacity Test Set Dubai, United Arab Emirates

AC High Voltage Low Capacity Test Sets are  specially designed for testing Insulators, CT’s PT’s ,  Low dielectric capacitive electrical equipment, transformers etc. as per National and International  Standards.  During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 200kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

For further details or requirements, Email us

AC High Voltage High Capacity Testers for Testing Cables

AC High Voltage High capacity testers are  specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International  Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

For further details or requirements, Email us

Inductive Load Banks Manufacturer in Delhi India

Load Banks are designed for load test to be carried on Single/Three Phase AC/ DC Power Supplies, DG sets, UPS and Inverters etc. We manufacture loads up to 3000kW suitable for working on Single Phase 230V +5% and 3Phase  400 V +5%  50HzAC supply. The power factor in AC can be variable/adjustable from 0.2 lag to unity to 0.3 lead. The capacities are available from 5kW to 3000kW. The units are available with Stepped & Stepless versions with Manual, Semi Automatic and Fully Automatic Controllers. Digital Multi function meters are also available to indicate voltage, current, watt, KVAr, Pf.

The Loads are normally designed for continuous operation and are forced air-cooled with auxiliary supply with Independent Controls.

We manufacture following types of Loads:

• Resistive Loads.
• Inductive Loads.
• Capacitive Loads.
• Resistive/Inductive combined Loads.
• Resistive/Inductive/Capacitive combined Loads.

Each load banks consist of coarse and fine controls as per the specific requirements.

For further details or requirements, Email us

HT Parallel Inductor Manufacturers in Delhi India

HT Parallel Inductor is used for range extension of Megger/Tettex/Presco AG Tan-Delta and Capacitance Test Set. It enables the inbuilt power supply to be able to test high capacity generators by regenerating the test current in parallel resonant design.The unit is so skillfully designed and constructed where we are able to achieve a Q-factor of 30 plus. The unit is housed in MS angle housing and manually controlled from the top.

Features:

• Q factor of more than 30.
• Compatible with any Tan Delta unit.
• Portable and Rugged in construction.

For further details or requirements, Email us

High Voltage Testing Equipment for Wire & Cable Industry

AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

For further details or requirements, Email us

High Voltage Low Capacity Testers Riyadh Saudi Arabia

AC High Voltage Low capacity testers are  specially designed for testing Insulators , CT’s PT’s ,  Low dielectric capacitive electrical equipment, transformers etc. as per National and International  Standards.  During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 200kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.


Features

• Light in weight
• Casted Wheel for easy movement
• Multiple safety locks for the operator
• Specially designed for field operation.

Standard Accessories

• Interconnecting Control Cable.
• Discharge Rod.
• Audio Visual alarm indicator.
• Corona Shield

Optional Accessories

• Output HV cable.
• Interconnecting / input power cable.
• Earthling lead.
• Canvas cover.
• LV Transformer Oil.

For further details or requirements, Email us

Fully Automatic Oil Test Set Kuwait

Fully Automatic Oil Test Set is designed for testing the dielectric strength of insulating oil as per IS-335.The unit develops high voltage between electrodes immersed in oil under test as per IS:6792. In addition to the test preparation in detail, the set is automatically governed by a trouble-free Microprocessor. These features enable user to operate the equipment with a single touch of the 'Feather Touch Button'. The results can be viewed on the backlit LCD display or can be printed as a hard copy. The results can be summarized at a later stage because of the presence of memory function for the tests conducted stored in the memory.


Features

• Compact size & portable design
• Build in safety arrangements
• Easy to operate
• Auto / Manual Selectable
• One Touch Operation
• On Screen LCD & Printer Facility on the Unit
• Real Time Clock & Date
• 9999 record Memory
• Computer Connectivity through USB/RS232
• Operator code programmable
• Rate of rise of voltage 0.5kV/sec to 5.0 kV/sec

For further details or requirements, Email us

HT Parallel Inductor - High Voltage Testing Equipment Abu Dhabi

HT Parallel Inductor is used for range extension of Megger/Tettex/Presco AG Tan-Delta and Capacitance Test Set. It enables the inbuilt power supply to be able to test high capacity generators by regenerating the test current in parallel resonant design.The unit is so skillfully designed and constructed where we are able to achieve a Q-factor of 30 plus. The unit is housed in MS angle housing and manually controlled from the top.

HT Parallel Inductor
Sr. No.	Parameters	Description
1	Rated Voltage	12KV
2	Maximum Current	4.5A, Indication on both sides for easy turning
3	Indicator	Position of the reactor
4	Cooling	Air Natural, Resin Cast
5	Maximum Reactive Power	54 Kvar
6	Range Extension @ 50HZ or 60HZ	Up to 1.0µF with current indication on both sides for easy turning  with inductor weight indication with max-min position with screwjeck arrangement which  ensures automatic lock  at desired location.

For further details or requirements, Email us

AC High Voltage Power Frequency Spark Tester Dubai

RE High voltage spark testers are designed for checking the quality of insulation coated wires for pin holes / weak insulation / exposed conductor during manufacturing at work floor.  The wire is passed through brass ball beads which carry high voltage. If any pin hole is detected in PVC, a spark develops and electro magnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit. Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of Spark Tester is up to 95%.


Special Features

• Designed for extruder and recoiling operations.
• Height adjustable Electrode box
• Compact size.
• Built in safety features for operators
• Easy to operate.
• Recoiling shutdown as per operator setting.

Accessories

• Exit point cable earthing
• Cable supporting roll. 

For further details or requirements, Email us