Insulation AC HV Rubber Testing Set Bahrain

Insulation Test Sets (Rubber / Acrylic / Fiber etc)

‘RE’ AC HV Rubber testing set is used for Testing Rubber Mats. These sets are generally used in Electrical manufacturing Industry/Power Houses, Electrical Repair etc. where AC H.V. test set is suggest by BIS or IEC. During AC H.V. testing High current is generated due to capacitive loading. AC High voltage test equipments are designed for continuous use, for testing, and can withstand short circuit. Fault burning can also be provided if desired.

Features

• Technologically advanced design that helped make proper use of space and minimize the size of the equipment.
• The equipment has been made so that it is very simple to operate, thus any person after learning once can operate it

For further details or requirements, Email us

AC High Voltage Cascaded Testing Equipment Doha Qatar

AC High Voltage High capacity testers are  specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International  Standards. During  manufacturing each unit is tested at multiple stages, thus ensuring consistency and best  quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.


Features

• Light in weight
• Casted Wheel for easy movement
• Multiple safety locks for the operator
• Specially designed for field operation.

Standard Accessories

• Interconnecting Control Cable.
• Discharge Rod.
• Audio Visual alarm indicator.
• Corona Shield

Optional Accessories

• Output HV cable.
• Interconnecting / input power cable.
• Earthling lead.
• Canvas cover.
• LV Transformer Oil.

For further details or requirements, Email us

AC High Voltage Breakdown Test Set Saudi Arabia

AC High Voltage Breakdown Test Set (0-15KV, up to 100mA)

Application – LT equipment and component manufacturer

AC high Voltage breakdown testers are designed for testing LT equipment and Home appliances as per IS/IEC standards. Even the smallest units are complete with all required accessories and features that are provided on the most advance high capacity unit. The unit is designed keeping safety as an utmost priority. It is suitable for application in Laboratories, manufacturing units and sites.

Features:

• Light in weight.
• Portable for any application.
• Additional safety features for users.
• Complete high voltage test facility instead of just breakdown facility.

Standard Accessories:

• I/p Lead – 3meter
• O/p Lead – 3meter

Optional Accessories:

• HT Cable  if need extra more than 3meter.
• Earthing lead.
• Crocodile clamp
• Dead man switch
• Grounding rod
• Hand Held HV Probe set

Technical Specifications:

• Input Voltage– 230V
• Output Voltage – 0-15KV up to 100mA as required.

The unit will be housed in M.S Sheets housing and will be compete with the following:-

1. Input ON/OFF switch with fuse.
2. Input ‘ON’ Indicator
3. HT ON Push Button.
4. HT ON Indicator
5. Push Button to increase/decrease the output.
6. H.T. Probe Set With H.T. Cable
7. KV Meter Digital
8. mA Meter Digital
9. Tripping Selector with tripping @25%,50%,75% and 100%mAmps as range given
10. Digital Timer
11. Input Lead - 3 meter.
12. Output Lead – 3 meter.
13. Zero Start Interlock.

For further details or requirements, Email us

AC High Voltage Tester Manufacturer Exporter to UAE

AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International  Standards. During manufacturing each unit is tested at multiple stages, thus ensuring consistency and best quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

Rectifiers and Electronics, a leading New Delhi, India based manufacturer and exporter of AC High Voltage Tester to UAE.

AC High Voltage High Capacity Test Set
Sr. No.	Parameters	Description
1	I/p Voltage	380/400V, 50/60HZ AC supply
2	O/p Voltage	Up to 800KV and 4A
		Integration of reactor after 100KVA,  Integration of series and parallel reactor after 1500KVA
3	Capacity	Up  to 3000KVA
4	Timer	0-9999 Sec./min. Digital
5	Control	Type 1- The unit can be manual/motorized control for voltage variation and push button controlled for HT actuation. Type 2- The unit can be complete with on board digitized panel with or without computer connectivity. Type 3- The unit can be PLC based complete with computer, HMI memory, printer etc. for operation.
6	Metering	Voltmeter: One Digital type connected on HT side to indicate the output voltage Scale:  0-800 kV AC. Ammeter: One Digital type ammeter Connected on earth side to indicate the leakage Current on sample under test. Scale :  0-40A Applicable only for type -1 For type -2 and type 3 metering is self contained
7	Protection	Tripping - A fast acting DC relay will isolate the circuit when the current exceeds pre-set level. Overload  - This is used as a  secondary protection  in case the input loads exceeds the preset value Overvoltage -  This is used as a  secondary protection  in case the output voltage exceeds the preset value
8	Interlocking	Zero Start Interlock - The unit will have zero start interlocking to avoid the transients on HV transformer and provision for cage door interlocking shall also be provided. Earth interlock- It ensures that HV will not actuate until good earthing is not provided.
9	Termination	The HT output on suitable HT insulator and other point at earth potential will be brought out on suitable insulator
10	Control Panel	The control panel is designed for five unique purposes. 1 -Control 2- Measure  3- Protect (Active and Passive)  4- Tripping 5 -Annunciate
11	Reactor	A Parallel / series reactor (LT and HT) when provided in the system resonates with the capacitive current generated during the dielectric testing of any component / equipment / system. It generally consists of motorised moving coil and fixed reactor. It operates up to a Q-factor of 20.
12	HV Transformer	The transformers are designed and manufactured as per IS /IEC guidelines. Single / Multiple stage step-up transformers are utilized for achieving the desired voltage. The units are designed and manufactured using the preeminent material from India and Abroad. The coils are vacuum impregnated and insulated with High Quality EHV Grade transformer oil as per relevant IS and IEC Standard.

For further details or requirements, Email us