High Voltage Spark Testers Manufacturers Delhi India

Are designed for checking the quality of PVC coated wires during manufacturing at shop floor. The PVC wire is passed through brass ball chains which carry high voltage. If any pin hole comes in PVC, a spark develops and electro magnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit.

The equipment uses a high frequency oscillator circuit for rising frequency to search the fault at low leakage current and signifies that as a fault, he fault is displayed to the operator by means of a visual indicator and audible. The equipment can test a variety of cable at various voltages for which KV setting & sensitivity setting is provided.

The different Spark Testers manufactured are of:

• Power Frequency (50Hz)
• High Frequency (500 Hz/3000Hz-5000Hz)

The Power Frequency Spark Tester is a Conventional Spark tester, being used by wire and cable manufacturers, since the start of cable manufacturing. These spark testers hold the efficiency gradient of approximately 85%. They leave a burn mark on the cable/wire at the point of fault, which makes it easier to locate and isolate / mend the fault.

• Suitable up to 200 Meter per minute
• Easy to operate

The High Frequency Spark Tester is used for High speed precision jobs where the requirement is of seizing the maximum number of faults. These Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of a high Frequency Spark Tester is upto 95%-98%. This efficiency is much better than conventional spark tester.

SPECIAL FEATURES

• High Speed operation upto (1000 m/min).
• Much smaller and higher unit.
• Computer Interface facility available.
• Efficiency of operation upto 95%.
• Suitable for extruder and recoiling.
• Short Circuit Protected

For further details or requirements, Email us or send Enquiry

Resistive Load Bank Exporters to Egypt

Rectifiers & Electronics, Popularly known as 'RE', is the Pioneer Organization in the field of High voltage testing equipment such as AC/DC High Voltage Test Sets and Other Electrical High Voltage Test Equipment in INDIA. In the last 33 Years, Through Continuous Aspirations, 'RE' has earned the Goodwill of Quality Control Engineers and Research Scientists Through out the Country. 

We at 'RE' Manufacture High Voltage Testing Equipment for a wide Variety of Industry, and Tailor Make Out Equipment to meet Their Specific Requirements or as per National / International Standards.

For further details or requirements, Email us or send Enquiry

Inductive Resistive Load Bank Manufacturers Delhi India

We at 'RE' Manufacture High Voltage Testing Equipment for a wide Variety of Industry, and Tailor Make Out Equipment to meet Their Specific Requirements or as per National / International Standards.

Our Major Strengths are:

• Complete In-house manufacturing facility
• Quality products that are economically priced
• Un-comparable after sales service
• Complete In-house R&D facility 
• Recognition by all the Test Houses in the country

For further details or requirements, Email us or send Enquiry

Inductive Load Manufacturers India

We are one of the leading manufacturers of Inductive Load in India. 'RE' has been a Leading Exporter of High Voltage Testing Equipment to Countries like United Kingdom, Zambia, Kenya, Germany, Dubai, Bangladesh, Bhutan, Nepal, etc.

For further details or requirements, Email us or send Enquiry

Resistive Load Dubai UAE

'RE' Manufactured Products are Robust, Reliable, Simple to Operate, and User Friendly. At 'RE', there is Continuous Effort to give Its Customers an Edge over Their Competition. We at 'RE' have complete in house Manufacturing Facility Inclusive of, "Fabrication of Housing, Construction of Transformer, Testing at every Stage, and Assembly of the Final Unit", which enables us to meet the Stringent Quality Norms.

To Support the Manufacturing Processes 'RE' also holds an In-House Research & Development Facility for Improvement & Innovation on Existing Technologies & Products AND for Discovery & Invention of New Technologies & Products - A Strength that has kept 'RE' far-ahead of Competitors and made 'RE' the Preferred Supplier of High Voltage Testing Equipment for Institutions and Facilities all over the Country.

For further details or requirements, Email us or send Enquiry

Inductive Load Doha Qatar

Rectifiers & Electronics, Popularly known as 'RE', is the Pioneer Organization in the field of High voltage testing equipment such as Inductive Load, AC/DC High Voltage Test Sets and Other Electrical High Voltage Test Equipment in INDIA. In the last 33 Years, Through Continuous Aspirations, 'RE' has earned the Goodwill of Quality Control Engineers and Research Scientists Through out the Country. 

'RE' was Established in 1970 with a Mission to cater to the Manufacturers of Northern India with the Cutting Edge Technology in the Field of Electrical Testing. 'RE' which was initiated as a Regional Concern, Soon Started Playing a Vital Role in Development of the Industry of the Entire Nation. 'RE' has been a Leading Exporter of High Voltage Testing Equipment to Countries like United Kingdom, Zambia, Kenya, Germany, Qatar, Dubai, Bangladesh, Bhutan, Nepal, etc.

For further details or requirements, Email us or send Enquiry

Inductive & Resistive Load Bank

Inductive Load Banks are used in conjunction with Resistive Load Banks for testing AC supplies at non unity power factors. Inductive load banks can be customised for a particular application, or they can be combined into one unit with resistive load banks.

For further details or requirements, Email us or send Enquiry

Inductive Load Bank

Inductive Load Bank

For further details or requirements, Email us or send Enquiry

Resistive Load Bank

Resistive Load Bank

For further details or requirements, Email us or send Enquiry

6kVA Inductive Load

RE’ 6kVA Inductive Load designed to testing single phase Meter Power Supply etc. The unit shall be designed for working on 230/250V single phase 50Hz AC Supply having output voltage 0-600 V at 10 Amps.  The load is rated continuously for temperature rise test. The unit shall be complete with knob to control the current and power factor independently.

For further details or requirements, Email us or send Enquiry

High Voltage Testing Equipment

Rectifiers & Electronics, Popularly known as 'RE', is the Pioneer Organization in the field of High voltage testing equipment such as AC/DC High Voltage Test Sets and Other Electrical High Voltage Test Equipment in INDIA. In the last 33 Years, Through Continuous Aspirations, 'RE' has earned the Goodwill of Quality Control Engineers and Research Scientists Through out the Country. 

'RE' was Established in 1970 with a Mission to cater to the Manufacturers of Northern India with the Cutting Edge Technology in the Field of Electrical Testing. 'RE' which was initiated as a Regional Concern, Soon Started Playing a Vital Role in Development of the Industry of the Entire Nation. 'RE' has been a Leading Exporter of High Voltage Testing Equipment to Countries like United Kingdom, Zambia, Kenya, Germany, Dubai, Bangladesh, Bhutan, Nepal, etc.

'RE' Manufactured Products are Robust, Reliable, Simple to Operate, and User Friendly. At 'RE', there is Continuous Effort to give Its Customers an Edge over Their Competition. We at 'RE' have complete in house Manufacturing Facility Inclusive of, "Fabrication of Housing, Construction of Transformer, Testing at every Stage, and Assembly of the Final Unit", which enables us to meet the Stringent Quality Norms.

To Support the Manufacturing Processes 'RE' also holds an In-House Research & Development Facility for Improvement & Innovation on Existing Technologies & Products AND for Discovery & Invention of New Technologies & Products - A Strength that has kept 'RE' far-ahead of Competitors and made 'RE' the Preferred Supplier of High Voltage Testing Equipment for Institutions and Facilities all over the Country.

We at 'RE' Manufacture High Voltage Testing Equipment for a wide Variety of Industry, and Tailor Make Out Equipment to meet Their Specific Requirements or as per National / International Standards.

For further details or requirements, Email us or send Enquiry

Secondary Current Injection Testing Equipment Exporter to Muscat Oman

'RE' Secondary Injection Test Sets have been designed keeping in view the requirements of field and laboratory. The sets are portable, light in weight, yet having all the technical features for testing relays and contractors.

SPECIAL FEATURES

• Compact Size.
• Built in safety arrangements in case of short circuit and over loading.
• Easy to operate.
• Efficient after sales service.
• Guaranteed for one year against manufacturing defects.

For further details or requirements, Email us or send Enquiry

Primary Current Injection Test Set Manufacturers Exporters to Doha Qatar

Primary Injection test sets are used to loading. Calibration and testing of CT's bimetals relays, Protection relays etc. Mostly Primary Injection Test set are designed as per customer's specification. The Primary Injections Test sets are of 15 minutes ON/30 Minutes OFF duty i.e. testing duty only. Loading transformers are design for continuous use for Temperature Rise for bus duct/Bus Bar etc.

Optional accessories requirement may include cable termination, timer, Temperature Indicator, multiple contactor, Individual Phase control etc.

SPECIAL FEATURES

• Compact in nature
• It is available in portable trolley type/stationery type  model Amps.
• Optional digital/analogue timer.
• Main Transformer upto 25,000 Amps Naturally air cooled type.

For further details or requirements, Email us or send Enquiry

Portable DC High Voltage Tester Manufacturer Exporter to Indonesia

Portable DC High Voltage Test Set is used for testing the underground cable for knowing the condition of cable-leakage at High Voltage. The units are supplied with 5 meter long input lead and 5 meter long output lead with sockets & clips. The unit comes with digital meters for easy readability with a test terminal for zero error.

SPECIAL FEATURES

• Available in 30, 60, 75, 120, 150 & 220 kV models
• Easy to operate
• Digital meters for easy readability.
• High Voltage Surge protection 
• Multiplier circuit for better life.

For further details or requirements, Email us or send Enquiry

Insulation AC High Voltage Test System Manufacturers Exporters to Malaysia

It shall be a compact high voltage A.C. insulation tester which may be powered by internal re-chargeable batteries and or by 230 V single phase AC supply. It shall display resistance at maximum leakage current 3mA. The unit shall be suitable for polarization Test.

For further details or requirements, Email us or send Enquiry

Induced Over Voltage Testing Equipments Singapore

Induced Over Voltage Test Set is used for testing the strength of insulation between turns and between other points of the transformers etc. as stipulated by BIS or other standard specification. For this test Double Voltage is applied across L.T. terminals for one minute, and to control the magnetizing current over voltage frequency is applied.

It is and independent unit having coupled motor and Generator with Control Panel to control the motor ad output voltage. Depending upon the design requirements  AC or DC motors are used.

SPECIAL FEATURES

• No foundation required
• Unit ready for use.
• Fine Voltage control.
• Short Circuit Protection.
• Caliberated Voltage and Ampere Meter.
• Easy to operate complete with operator safety features.
• Guaranteed for one year against manufacturing defects.
• Efficient After Sales Service.

For further details or requirements, Email us or send Enquiry

High Voltage Low Capacity Testers Dubai, Abu Dhabi, UAE

'RE' High Voltage Low Capacity Testers are specially designed for testing electrical, industrial appliances/Installations as per IS. Specifications. 'RE' High Voltage testers have been designed & developed in house. During manufacturing each unit is tested at multi stages, thus ensuring consistent & best quality. 

These instruments are air-cooled, oil-cooled or air & oil cooled combined as per requirement. Beside common HV Test Kit, we manufacture PD free cascaded with indicator to reduce the input testing current.

For further details or requirements, Email us or send Enquiry

Primary Current Injection Test Set Manama, Bahrain

Primary Injection test sets are used to loading. Calibration and testing of CT's bimetals relays, Protection relays etc. Mostly Primary Injection Test set are designed as per customer's specification. The Primary Injections Test sets are of 15 minutes ON/30 Minutes OFF duty i.e. testing duty only. Loading transformers are design for continuous use for Temperature Rise for bus duct/Bus Bar etc.

Optional accessories requirement may include cable termination, timer, Temperature Indicator, multiple contactor, individual phase control etc.

SPECIAL FEATURES

• Compact in nature
• It is available in portable trolley type/stationery type  model Amps.
• Optional digital/analogue timer.
• Main Transformer upto 25,000 Amps Naturally air cooled type.

For further details or requirements, Email us or send Enquiry

DC High Voltage Testing Equipment Riyadh Saudi Arabia

This equipment is used for testing the underground cable, large Generator, Motor Transformer capacitor etc as per IS specification. The unit comes equipped with digital meters, motorized controls, one/two way computer interface, Emergency shut down and Optimum operator safety features.

SPECIAL FEATURES

• Multiplier circuit for economy and better life.
• Multiple interlocks for human safety.
• Optional computer interface facility.
• Available unto 1000 kV and 1 Amps.

For further details or requirements, Email us or send Enquiry

Inductive & Resistive Load Bank Manufacturers Exporters to Middle East Countries

We are a leading Manufacturer, Supplier & Exporter of AC High Voltage Testing Equipments, DC High Voltage Test Sets, AC High Current Testers, DC High Current Testing Equipment, AC Electrical Machines like Inductive & Resistive Load Bank to Middle East Countries like Kingdom of Saudi Arabia, Kuwait, Kingdom of Bahrain, Qatar, United Arab Emirates, Sultanate of Oman, Republic of Yemen etc.

For further details or requirements, Email us or send Enquiry

Induced Over Voltage Test Set / Tester Exporters to Doha Qatar

Induced Over Voltage Test Set is used for testing the strength of insulation between turns and between other points of the transformers etc. as stipulated by BIS or other standard specification. For this test Double Voltage is applied across L.T. terminals for one minute, and to control the magnetizing current over voltage frequency is applied.

It is and independent unit having coupled motor and Generator with Control Panel to control the motor ad output voltage. Depending upon the design requirements  AC or DC motors are used.

SPECIAL FEATURES

• No foundation required
• Unit ready for use.
• Fine Voltage control.
• Short Circuit Protection.
• Caliberated Voltage and Ampere Meter.
• Easy to operate complete with operator safety features.
• Guaranteed for one year against manufacturing defects.
• Efficient After Sales Service.

For further details or requirements, Email us or send Enquiry

AC High Voltage Testing Equipment Exporter to Dubai Abu Dhabi UAE

‘RE’ High Voltage High capacity testers are specially designed for testing cables and Electrical Equipment as per I.S Specifications.

‘RE’ High Voltage Testers have been designed and developed in house. During manufacturing each unit is tested at multiple stages, thus ensuring consistency and best quality. These instruments are cooled air cooled, oil cooled or air and oil cooled combined as per requirement.

SPECIAL FEATURES

• Supplied up to 300KV and 100mA.
• Light in weight.
• Casted Wheel for easy movement.
• Multiple safety locks for the operator.
• Build in safety for operator
• Efficient after sales service.
• Guaranteed for one year against manufacturing defects only.

For further details or requirements, Email us or send Enquiry